Drift velocity

src: i.ytimg.com

The drift velocity is the average velocity that a particle, such as an electron, attains in a material due to an electric field. It can also be referred to as axial drift velocity. In general, an electron will propagate randomly in a conductor at the Fermi velocity. An applied electric field will give this random motion a small net flow velocity in one direction.

In a semiconductor, the two main carrier scattering mechanisms are ionized impurity scattering and lattice scattering.

Because current is proportional to drift velocity, which in a resistive material is, in turn, proportional to the magnitude of an external electric field, Ohm's law can be explained in terms of drift velocity.

The most elementary expression of Ohm's law is:

${\displaystyle u=\mu E,}$

where u is the drift velocity, ? is the electron mobility (with units m²/(V?s)) of the material and E is the electric field (with units V/m).

Video Drift velocity

Experimental measure

The formula for evaluating the drift velocity of charge carriers in a material of constant cross-sectional area is given by:

${\displaystyle u={j \over nq},}$

where u is the drift velocity of electrons, j is the current density flowing through the material, n is the charge-carrier number density, and q is the charge on the charge-carrier.

In terms of the basic properties of the right-cylindrical current-carrying metallic ohmic conductor, where the charge-carriers are electrons, this expression can be rewritten as:

${\displaystyle u={m\;\sigma \Delta V \over \rho ef\ell },}$

where

• u is again the drift velocity of the electrons, in m?s^-1
• m is the molecular mass of the metal, in kg
• ? is the electric conductivity of the medium at the temperature considered, in S/m.
• ?V is the voltage applied across the conductor, in V
• ? is the density (mass per unit volume) of the conductor, in kg?m^-3
• e is the elementary charge, in C
• f is the number of free electrons per atom
• l is the length of the conductor, in m

Maps Drift velocity

Numerical example

Electricity is most commonly conducted in a copper wire. Copper has a density of 8.94 g/cm³, and an atomic weight of 63.546 g/mol, so there are 140685.5 mol/m³. In one mole of any element there are 6.02×10²³ atoms (Avogadro's constant). Therefore in 1 m³ of copper there are about 8.5×10²⁸ atoms (6.02×10²³ × 140685.5 mol/m³). Copper has one free electron per atom, so n is equal to 8.5×10²⁸ electrons per cubic metre.

Assume a current I = 1 ampere, and a wire of 2 mm diameter (radius = 0.001 m). This wire has a cross sectional area of 3.14×10^-6 m² (A = ? × (0.001 m)²). The charge of one electron is q = -1.6×10^-19 C. The drift velocity therefore can be calculated:

${\displaystyle {\begin{aligned}u&={I \over nAq}\\u&={\frac {1{\text{C}}/{\text{s}}}{\left(8.5\times 10^{28}{\text{m}}^{-3}\right)\left(3.14\times 10^{-6}{\text{m}}^{2}\right)\left(1.6\times 10^{-19}{\text{C}}\right)}}\\u&=2.3\times 10^{-5}{\text{m}}/{\text{s}}\end{aligned}}}$

Dimensional analysis:

${\displaystyle u={\dfrac {\text{A}}{{\dfrac {\text{electron}}{{\text{m}}^{3}}}{\cdot }{\text{m}}^{2}\cdot {\dfrac {\text{C}}{\text{electron}}}}}={\dfrac {\dfrac {\text{C}}{\text{s}}}{{\dfrac {1}{\text{m}}}{\cdot }{\text{C}}}}={\dfrac {\text{m}}{\text{s}}}}$

Therefore in this wire the electrons are flowing at the rate of 23 ?m/s. At 60 Hz alternating current, this means that within half a cycle the electrons drift less than 0.2 ?m. In other words, electrons flowing across the contact point in a switch will never actually leave the switch.

By comparison, the Fermi flow velocity of these electrons (which, at room temperature, can be thought of as their approximate velocity in the absence of electric current) is around 1570 km/s.

src: i.ytimg.com

See also

• Flow velocity
• Electron mobility
• Speed of electricity
• Drift chamber
• Guiding center

src: slideplayer.com

References

src: i.ytimg.com

External links

• Ohm's Law: Microscopic View at Hyperphysics

Source of article : Wikipedia